Effective ways to quickly get rid of the layer of fat on the baking sheet

Baking tray materialPrecautions and practical adviceCleaning method
Silicone and Teflon Delicate cleaning of a Teflon or silicone baking tray is carried out using a soft sponge and a washing gel that contains no acids. Silicone baking sheets before cleaning are soaked overnight in warm water with the addition of soap.
Cleaning burned Teflon sheet takes place in several stages:

  1. With a plastic or wooden spatula, dirt is scraped off.
  2. The product is plentifully covered with salt and left for 10 minutes to absorb a layer of fat.
  3. The surface is cleaned of salt very carefully so as not to damage the coating.
  4. With a soft sponge, the product is washed with dishwashing gel under running hot water.
Glass, ceramics, enamel The surfaces of these materials are capricious during operation, but they should be cleaned with hard washcloths.It is important to wear protective rubber gloves before carrying out the procedure. It is better to clean it immediately after cooking, soaking it in warm water with dishwashing liquid. For effective purification, you can use a small amount of hydrogen peroxide.
Stainless steel When cleaning a stainless steel pan, it is undesirable to use abrasives and coarse metal sponges, since an intense impact on the surface may scratch it. Stainless steel baking sheet is easily cleaned from soot using warm soda gruel, which must be evenly distributed over the surface and left for 2 hours. Then wash with a kitchen sponge with the addition of a cleaning gel.
Alternatively, baking powder can be used as an alternative to baking soda.
Aluminum The aluminum baking tray withstands rough handling with a metal brush and fine powder. To remove the remnants of burnt food from aluminum baking sheets will help the usual dishwashing detergent, the main thing is to wipe off dirt with a metal brush.