How to connect SATA?

Technologies are being improved, including computer equipment. There is a purchase of a new component ends with the problems of its installation in the system unit. Now many are wondering how to connect a SATA drive. Many do not know how to act correctly, to make it internal or external. This applies not only to beginners in computer business, but also to those who know and work with them for a long time. Of course, the program is easier to install than to deal with the technology of the computer itself. Let it not scare you, because a detailed sequence of actions and pointers on the system unit will help you cope with this problem.

Installing the drive outside

For beginners, it is important to know the sequence of how to connect SATA to avoid the difficulties that can be encountered. First of all, you should be aware of the fact that you have to start working when the computer is turned off. If the disc is installed inside the computer, it will heat up and not feel very comfortable, especially if the connector is small and there is no ventilation at all.This method of connection is suitable in the event that its use will be extremely rare. In order to connect it outside, you will need a cable. Cable is not a cheap pleasure, but worth it. And if it is good to rummage in the stash, you can pick up something at home. Each device is connected to its own connector, so you can not worry about which side to connect the cable to the motherboard, and which to the device. What is a plus SATA, is that you do not need to pick up special connectors, especially in new computers. If you have a new hard drive, it must be formatted. To do this, disable the old hard drive and proceed to formatting. Then we reconnect the old hard drive, and re-create all logical drives, formatting them again.

Install the hard drive inside

Usually discs are already sold with suitable cables. But if you need to install it inside, we will tell you how to connect SATA. If your computer serves no more than two years, then there will be no problems with its connection. Because new technologies are not standing still when creating a new computer model,all new adaptations are taken into account.

You need to install the hard disk so that there is a small space above and below for better ventilation. This is done so that it does not heat up. Next will be the sequence, as with the cable. It is not necessary to remove the video card, as it is higher than the place where you need to connect the hard disk. You can attach it with screws. Selecting the desired connector from the four existing ones. We will not hurry to connect the informational SATA, because it will disturb us, We will do everything with a careful sequence. Here you will notice that there is a free cable from the power supply. You need to connect it to the connector on the hard disk. Finally we reached the connection of the information cable. We connect it with one side - to the motherboard, and the other, respectively, to the hard disk. If you have a new computer, then the connector should already be a new SATA. Otherwise, it's old, Molex. But if the connector for SATA is not provided, do not despair, and use the adapter. They are now missing. All! Close the lid and start the computer.

In order to check if the device is there and whether we connected it correctly, you need to go to the BIOS. To install the operating system, it will be necessary on the tab to change the boot priorities from the hard disk to the drive. Restart the computer and you can install the operating system. But if the hard drive is not visible, simply switch all SATA connectors to automatic mode. Then be sure to save the changes and exit accordingly. And after the operations done with the device, you can safely begin to work.

Connection difficulties

It also happens when the connection is not so easy given. This happens not because the person who does this does not understand the algorithm of all actions, but because of technical reasons. For example, with an inconvenient location of connectors on the motherboard (next to the PCI Express video card), the connection will be difficult. Since there was already a connection to the SATA connectors, the video card, resting on the cables, is not inserted as it should. But you can get out of the situation easily. You just need to buy two interface cables that will not be interconnected and will not interfere with the connection.

Thus, with the help of our story and successive instructions, you will not wrestle with how to connect a SATA drive and easily cope with this task. Do not rush to contact specialists who understand computers. You just have to weigh the situation adequately. Analyze the instructions and free, without much effort, independently perform the work. You will succeed!