Install the tablet in the car
Today it is hard to imagine a car without a radio. Often, the owners of their cars want to improve comfort in the car. To do this, buy a multimedia recorder with a set of functions. But not everyone can afford a branded multimedia recorder. After all, it is not worth small money. And when buying a cheap Chinese radio tape recorder, you will have to play the lottery. After all, no one knows how long it will work, even the manufacturer. The way out of this situation is to install the tablet in the car. The average branded tablet now costs as much as a cheap Chinese multimedia tape recorder. Additional advantages of the tablet are the brand warranty for this product and the ability to take the tablet home. In fact, one tablet can replace both the radio in the car and the computer at home. One shot can kill two birds with one stone.To install the tablet in the car was done carefully, and it organically fit into the design of the car's interior,will have to try and spend some time and effort.In this case, the tablet can not be pulled out in any case. It should turn out quality cast.After the epoxy has completely dried, you need to remove the tablet and process the resulting impression in a neat shelf. Immediately you need to drill two holes for connectors for charging and headphones. Then process the shelf with sandpaper to remove rough drops. Apply several layers of plastic putty for plastic one by one with a rubber trowel. After the putty has dried, treat the shelf with sandpaper, try on a tablet. If necessary, remove excess putty or add an additional layer. If the tablet clearly falls into place, then the shelf is ready. In the end you need to paint the shelf with spray paint. For this it is best to hang it. After painting, wait until the shelf is completely dry.For a clear and loud sound you need an amplifier. You can install it in place of the old radio. From the amplifier you need to make taps to the speakers and tap to feed the signal from the tablet. A plug is needed for a 3.5 connector, as on headphones. After installing the amplifier, you need to power up the tablet.To do this, you need to connect the cigarette lighter to the power cord that remains from the old radio, and insert the car charger for the tablet into it and insulate it all well.
The procedure for installing a tablet in the carInstalling a tablet in a car involves several steps:
- preparing a place for a tablet;
- making the shelf under the tablet;
- installing the amplifier and connecting the power wires;
- installing the tablet in the car and setting it up.