We knit socks with Owl pattern

Knit with socks with Owl pattern. Socks are not only warm, but also very beautiful thanks to the original pattern.

Materials and tools:

  1. yarn of about 370 m (75% supervosh, 25% nylon);
  2. spins 2.75 mm and 2.5 mm circular, 80 and 100 cm long, or the size required for the desired knitting density;
  3. 80 beads with a diameter of 3.3 mm for owl eyes;
  4. thin hook;
  5. markers;
  6. a knitting needle for braid;
  7. Tapestry needle.

Pattern Description

Density of knitting:28 loops x 42 rows = 10x10 cm faces. satin stitch.

The instruction is written for knitting by the “magic loop” method, it can be modified for knitting on double-pointed needles.

Sizes:Female S, M, L

Cuff girth:12 (15, 18) cm at rest, 25 (30, 33) cm at stretched condition.

Knitting description

Cuff

Using larger knitting needles and a plastic set of loops, type 56 (64, 72) loops and close them into a circle, making sure not to twist.

We knit according to the scheme of the cuff 4 times.

Leg

Move to the smaller size of the spokes.Knit under the scheme Leg / top 2-3 times. Each repetition of the pattern has a length of approximately 5 cm. The 2 repetitions of the Leg / top design and the cuff design add up to approximately 15 cm in length. If you are not using beads, knit these loops on the diagram like face loops.

Heel

Place 28 (32, 36) loops on the looper for the top of the foot. Knit heel on the remaining 28 (32, 36) loops. Turn the work out. side to yourself. Knit rows 1-24 heel patterns.

Continuing individuals. Satin up to a length of 5.5-6.5 cm or to the desired length, finish near the outside. parties.

Another heel option.

Place the next 28 (32, 36) loops on the looper for the top of the foot. Knit heel on the remaining 28 (32, 36) loops. Turn the work out. side to yourself.

Row 1: remove 1 loop, 27 (31, 35) w. rotate;

Row 2: [remove 1 loop of 1 person.]. Repeat until the end of the row, ending with 1 person., Turn.

Repeat rows 1-2 until heel length is 5.5 - 6.5 cm or until the desired length, finish after row 1.

Turning the heel

We knit shortened rows.

Row 1 (front side): remove 1 loop, 14 (16, 20) faces., 2 together faces with a tilt to the left, 1 faces. rotate;

Row 2: remove 1 loop, 3 (5, 7) w., 2 w. together, 1 w.rotate;

Glad 3: remove 1 loop, individuals. up to 1 loop before turning in the previous row, 2 have faces. with a tilt to the left, 1 person., turn;

Row 4: remove 1 loop, izn. up to 1 loop before turning in the previous row, 2 together ip., 1 izn. rotate.

Repeat rows 3-4 until all the loops are knitted, end with 3.

There are 16 loops left (19, 29).

Forming a wedge lift

Installation circular row: remove 1 loop, 7 (9, 10) faces., set a marker to indicate the beginning of a circular row. 8 (9, 10) faces., We lift and knit 1 loop from each removed loop on the edge of the heel, we add 1 loop between the heel and the upper part of the foot. We put the marker, continue to knit 28 (32, 36) loops of the upper honor of the foot according to the pattern, starting with row 1 of the Foot / Top scheme. put the marker. We add 1 loop between the upper part of the foot and the heel, lift and knit 1 loop from each loop taken along the edge of the heel, 8 (8, 10) faces.

Circular series 1: persons. up to 3 loops in front of the marker, 2 persons together., 1 persons., we throw the marker. Knit on the pattern to the next marker, throw the marker. 1 persons., 2 persons together. with a tilt to the left, faces. until the end of the circular row. 2 loops reduced.

Circular series 2: persons.before the marker, throw the marker, knit on the pattern to the next marker, throw the marker, individuals. until the end of the circle row.

Repeat rows 1-2 until there are 56 (64, 72) loops.

Foot

Remove the marker at the beginning of the row, knit the faces. until the next marker. Now this marker is considered a marker for the beginning of the series. We distribute the loops in such a manner so that the loops of the sole are on the same needle, the loops of the upper honor of the foot - on a friend needle. We continue to knit loops of the upper part of the foot on the pattern. and the loops of the soles are of the faces. stitch until the length of the sole reaches 5 (6, 7) cm or the desired length, end with a series of 9 (19, 21) patterns.

Toe

We knit the scheme Mysok-start on the spoke of the upper part of the foot and faces. stitch on the needle of the sole.

Circular row 1: we knit the Nysok scheme on the loops of the upper part of the foot, we throw a marker, 1 person., 2 people together. with a tilt to the left, faces. up to the last 3 loops in front of the marker, 2 together faces., 1 persons.

Circular series 2: We knit a pattern of the Muzzle on the back of the upper part of the foot and faces. strap on the blue soles.

Repeat rows 1-2 until there are 8 loops on each knitting needle (16 in total).

Sew them with a knitted suture.