Hair dye «White dahlia»
To make such a hair ornament you need to prepare:- 2.5 cm wide pieces of satin white ribbon , length, which should be 5 cm, they will need 55 pieces. - lighter. - 3 large pink beads. - glue gun. - metal ruler. - soldering iron . - a circle with a diameter of 4.5 cm made of satin white ribbon. - hair tie. Work sequence. From all prepared pieces should be postponed one away from work, he will need in the final stage of creating jewelry. The remaining ribbons are necessary for making petals for a flower. For this, the segment should be folded in half along its length, with the wrong side inwards.After that, the part needs Cut off the upper corner with a soldering iron. The folded piece is laid on a wooden chopping board and pressed against a metal ruler, which will mark the cutting line.It is necessary to cut from the upper left corner towards the bottom diagonally, not reaching the lower right corner by 1 cm.This method of cutting the fabric allows you to simultaneously cut off the excess material and solder additions between each other. Further detail needs to be straightened, so that the seam is in the middle.Now lower The lower cut must be burned with a lighter flame so that the fabric does not crumble. Next, the detail must be turned to face it and tuck both edges to the middle at the bottom and set them on fire in this position.The petal is made, the rest are created exactly . In the end result, they should be 54 pieces. Now, the prepared circle should be carefully burned edges. He will be the base of the flower. Along its edges, it is necessary to glue a glue gun with 9 petals in a circle, which will create the first row.Then in the second row you need to glue the same 9 petals,but placing them between the two details of the previous row.By the same principle, the other petals are glued until 6 pieces remain free. The remaining details will be the last row and completion of the flower. To do this, pour a little glue into the empty middle in order to make the base stronger. And in the accumulated glue you need to strengthen the left petals.In the middle of the color there is not much free space left, which should be filled with 3 large beads.From the seamy side of the flower you need to gum hair, placing it in the center.To hide the place for gluing gum and make the decoration complete and neatly decorated, you should paste the tape set aside at the very beginning. From it you need to cut a rounded part and fix it at the place where the rubber band connects with the flower. Now the decoration of the "White Dahlia" is completely done.